Skip to main content

Reverse Osmosis Systems

Reverse Osmosis systems can be used for Boiler Feed Water, Final Rinse for PCB, Laboratory Usage and more…

Aquadition can design a reverse osmosis systems to your requirements. Anything from an under sink unit for domestic use up to a high output unit for large commercial applications.

Reverse osmosis (RO) is a membrane-technology filtration method that removes many types of large molecules and ions from solutions by applying pressure to the solution when it is on one side of a semi permeable membrane. The result is that the solute is retained on the pressurised side of the membrane and the pure solvent is allowed to pass to the other side. To be “semi permeable,” this membrane should not allow large molecules or ions through the pores (holes), but should allow smaller components of the solution (such as the solvent) to pass freely.

Our systems can include:

  • Automatic microprocessor control with continuous conductivity monitoring and readout.
  • High conductivity cut out.
  • High water level cut out & start probes.
  • Automatic flushing.
  • Pre service flush and total run accumulator.
We can provide duplex water softening systems to feed the Reverse Osmosis unit for greater membrane life.

A few select customers who have an Aquadition Reverse Osmosis system include;

  • Pall Europe (Lab Use).
  • Teva Pharmaceuticals (Lab Use).
  • Vector Aerospace (boiler feed water).

Visit our Shop

We offer a wide range of products to meet your commercial water treatment needs

Get a free survey

Tel: +44 (0) 23 9269 1035

© 2024 Aquadition. Site made by UP for Digital | Privacy Policy | Terms and Conditions | reg no: 01362650 | Fourth floor, Abbotts House, Abbey Street, Reading, Berkshire, RG1 3BD +44 (0) 23 9269 1035